Connecting Networks Version 6 – CN Chapter 5 Exam

QUESTION 1

Which step supports disaster recovery and should be performed first when upgrading an IOS system image on a Cisco router?

Delete the current image from flash memory.

Copy the current image from the router to a TFTP server.*

Use the boot system command to configure the router to load the new image.

Configure the router to load the new image from the TFTP server.

QUESTION 2

Refer to the exhibit. A network engineer is preparing to upgrade the IOS system image on a Cisco 2901 router. Based on the output shown, how much space is available for the new image?

25574400 bytes

249856000 bytes

221896413 bytes*

33591768 bytes

QUESTION 3

The customer of a networking company requires VPN connectivity for workers who must travel frequently. To support the VPN server, the customer router must be upgraded to a new Cisco IOS software version with the Advanced IP Services feature set. What should the field engineer do before copying the new IOS to the router?

Set the router to load the new IOS image file directly from the TFTP server on the next reboot.

Delete the currently installed IOS by using the erase flash: command, and reload the router.

Issue the show running-configuration command to determine the features of the currently installed IOS image file.

Issue the show version and the show flash commands to ensure that the router has enough memory and file space to support the new IOS image.*

QUESTION 4

Match each OSPF LSA description with its type. (Not all options are used.)

QUESTION 5

Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
Why are users in the OSPF network not able to access the Internet?

The default route is not redistributed correctly from router R1 by OSPF.

The interface that is connected to the ISP router is down.

The OSPF network statements are misconfigured on routers R2 and R3.

The OSPF timers that are configured on routers R1, R2, and R3 are not compatible.

The network statement is misconfigured on router R1.*

QUESTION 6

Which command will start the process to bundle two physical interfaces to create an EtherChannel group via LACP?

channel-group 2 mode auto

interface port-channel 2

channel-group 1 mode desirable

interface range GigabitEthernet 0/4 – 5 *

QUESTION 7

What statement describes a Cisco IOS image with the “universalk9_npe” designation for Cisco ISR G2 routers?
It is an IOS version that, at the request of some countries, removes any strong cryptographic functionality.​*
It is an IOS version that provides only the IPBase feature set.
It is an IOS version that offers all of the Cisco IOS Software feature sets.
It is an IOS version that can only be used in the United States of America.

QUESTION 8

Fill in the blank. Do not use abbreviations.
The license ” install” flash0:seck9-C1900-SPE150_K9-FAB12340099.xml command will restore the specified saved Cisco IOS Release 15 license to a router.

QUESTION 9

Refer to the exhibit. Match the components of the IOS image name to their description. (Not all options are used.)

Place the options in the following order:
specifying the feature set -> universalk9 
minor release number -> 
where the image runs and if the file is compressed -> mz 
platform on which the image runs -> c1900 
– not scored –
maintanence release and rebuild number -> M4 
new feature release number -> 
file extension -> bin
major release number -> 15

QUESTION 10

Match the description to the Cisco IOS category. (Not all options apply.)

Place the options in the following order: 
technology train
[+] branches from another train 
[+] has the latest features 
mainline train
[#] possibly is 12.4 
[#] contains mostly bug fixes

QUESTION 11

Refer to the exhibit. 

Which of the three Cisco IOS images shown will load into RAM?
The router selects the second Cisco IOS image because it is the smallest IOS image.
-> The router selects an image depending on the boot system command in the configuration. <-
The router selects the third Cisco IOS image because it contains the advipservicesk9 image.
The router selects the third Cisco IOS image because it is the most recent IOS image.
The router selects an image depending on the value of the configuration register.

QUESTION 12

In addition to IPBase, what are the three technology packs that are shipped within the universal Cisco IOS Software Release 15 image? (Choose three.)
Advanced IP Services
SP Services
Unified Communications*
Security*
DATA*

QUESTION 13

Which two conditions should the network administrator verify before attempting to upgrade a Cisco IOS image using a TFTP server? (Choose two.)
Verify the name of the TFTP server using the show hosts command.
Verify that the TFTP server is running using the tftpdnld command.
Verify that the checksum for the image is valid using the show version command.
Verify connectivity between the router and TFTP server using the ping command.*
Verify that there is enough flash memory for the new Cisco IOS image using the show flash command.*

Add Comment